When SingleSet is connected to the bike's intercom system and an Audio Alert Device, and the bike's intercom system is "on", the Audio Alert Device output can be heard in the Driver and Passenger's helmet headset.

A wide array of Device Harnesses (sold separately) are available for the most popular Audio Alert Devices.

If the bike's audio system is configured to mute music when passengers speak into the intercom, the music will mute when the Audio Alert Device gives it's alarm.

SingleSet is installed between either the Driver or Passenger's headset and the bike's intercom system. A variety of Intercom Harnesses (sold separately-see table below) are available.

Connecting SingleSet to its Harnesses is easy: Connect the Audio Alert Device Harness audio connector to SingleSet's audio connector; connect the Device Harness power connector to a Power Harness (sold separately).

MSRP - USD 35.00 (SingleSet Module only- Power, Device and Intercom Harnesses sold separately)

"SINGLESET...DUALSET.... AUXSET.... GPS/MPGSET......WHICH ONE DO I WANT?"

 

 

Model & Part number

-Status-

Effective Serial Number

 Installation Instructions

Assembly Drawing

Intercom Harness Required

SingleSet

95198Rev1

-OBSOLETE-

9753

 

Uses Type 1 Intercom Harness

SingleSet2.2

95459Rev0

-ACTIVE-

70608180

 

Uses Type 2 Intercom Harness

 

Support Documents:

 Document

Part #

View

 Power Hookup Options

65180

 Comparison of Interface Products

 65183